Casting
Wesgo Platinum Melting Dish
A melting crucible specially for platinum, made by Wesgo. Designed to withstand the high temperatures that are needed for platinum and precious alloys.
| code | description |
|---|---|
| CU-716 | Straight Back / 8 troy oz |
| CU-717 | High Back / 10 troy oz |
Investment Remover
Non corrosive, non fuming solution formulated for complete cleaning in minutes. No harmful effects to personnel during use. Mix one part of solution with five parts of water. Not for use on aluminum, pearls or calcified stones.
| code | contents |
|---|---|
| CW-190 | 1 Gallon |
Crucible with Handle
This melting dish has a removable heat resistant wooden handle. The crucible is made of fused silica for efficient melting and will not contaminate precious metals.
| code | description |
|---|---|
| CS-220 | Handle Only |
| CS-222 | Crucible & Handle |
| CU-698 | Crucible - 7.5 oz |
Crucible Tongs
These tongs are made of steel, with curved or straight ends to hold heated crucibles when pouring molten metal into molds.
| code | description |
|---|---|
| CU-600 | 19" Straight |
| CU-601 | 19" Curved |
Stirring Rods
High heat resistant graphite or quartz stirring rods to stir molten metal in crucibles or dishes. Use to skim the surface of molten metal before pouring.
| code | description | Size |
|---|---|---|
| CU-606 | Carbon | 12" x 3/8" |
| CU-607 | Quartz | 12" x 3/8" |
Adjustable Ingot Molds
Convert metal scrap into rolling stock. Made of high quality steel, the mold cavities are smoothly finished. Each mold may be reduced in size by adjusting the sides in a horizontal direction.
| code | l x w x t | dwt |
|---|---|---|
| IM-780 | 50 x 45 x 3.5mm | 80 |
| IM-790 | 70 x 45 x 4.5mm | 150 |
| IM-800 | 100 x 45 x 4.5mm | 200 |
| IM-802 | 135 x 70 x 5.5mm | 500 |
Reversible Ingot Molds
You may convert metal scrap into convenient and usable shapes: round, half round or flat. Simply melt metal and pour into the heated mold. To mold flat ingots one side is to be reversed. The mold is in two parts for ease of extraction.
| code | description |
|---|---|
| IM-703 | Clamp Only |
| IM-704 | Ingot Molds |
Open Ingot Molds
Used to make large ingots from molten scrap. One piece forged steel mold with tapered sides for easy extraction of the ingot.
| code | l x w x t | dwt |
|---|---|---|
| IM-806 | 35 x 90 x 35mm | 50 |
| IM-807 | 30 x 120 x 45mm | 80 |
| IM-808 | 40 x 155 x 65mm | 200 |
Wire Ingot Mold
Cast molten scrap into wire shapes that may subsequently be drawn into profiles. Easy to hold by the handle, each mold has three different cavities and are available in two lengths.
| code | description | length |
|---|---|---|
| IM-803 | Regular | 6" |
Casting Alloys
High purity alloys when added to 24k gold will create a lower carat and color of your choice. Sold in troy ounzes.
 |
|
| code | description |
|---|---|
| CA-9320 | Yellow Casting or Rolling Alloy for 10K, 14K, 18K |
| CA-9340 | Yellow Casting or Rolling Alloy for 10K, 14K, 18K |
| CA-2960 | White Casting Alloy for 10K, 14K, 18K |
| CA-2860 | White Rolling Alloy for 10K, 14K, 18K |
| CA-3886 | White Rolling Alloy for 10K, 14K, 18K |
| CA-Copper | Copper |
| CA-Fine Silver | Fine Silver Grains |
| AND MANY MORE. Call 213-687-8533 for details. | |
Mini Wax Injector with Hand Pump
Wax Capacity: 1-1/3 qt
Max Temp: 250 F
Weight: 19 lb
Dimensions: 8"W x 14"H
| code | description |
|---|---|
| WI-200.007 | 120V |
| WI-200.010 | 220V |
Mini Wax Injector
Wax Capacity: 1-1/3 qt
Max Temp: 250 F
Weight: 19 lb
Dimensions: 8"W x 10"H
| code | description |
|---|---|
| WI-200 | 120V |
| WI-200.001 | 220V |
2-3/4 Qt Wax Injector
Wax Capacity: 2-3/4 qt
Max Temp: 250 F
Weight: 27 lb
Dimensions: 10"W x 14"H
| code | description |
|---|---|
| WI-201 | 120V |
| WI-201.001 | 220V |
4 Qt Wax Injector
Wax Capacity: 4 qt
Max Temp: 250 F
Weight: 34 lb
Dimensions: 10"W x 18"H
| code | description |
|---|---|
| WI-203 | 120V |
| WI-203.001 | 220V |