Casting
Knife Handle & Spare Blades
Made of high impact plastic, and shaped for a comfortable grip, these handles hold cutting blades securely when cutting molds open. Surgical steel hollow ground blades are available as replacement.
| code | description |
|---|---|
| CM-902 | Blade #10A |
| CM-900 | Blade #11 |
| CM-901 | Blade #12 |
| CM-904 | Knife Handle - Plastic |
 |
|
| code | description |
|---|---|
| CM-905 | Soft Grip Knife With Safety Cap |
| CM-906 | 5 pcs. Set of Replacement Blades |
Soft Grip Knife
Non-slip, soft grip handle knife has a knurled screw locking arrangement for blades. Knife measures 5” in length without the blade. Spare blades are available.
Rubber Mold Vise Grip
| code | description |
|---|---|
| CM-VGrip | Rubber Mold Vise Grip |
Sprue Rod Former/Sprue Mandrel
Sprue tip with guide may be heated to form cone shaped entry hole for wax injection.
| code | description |
|---|---|
| CS-216 | Sprue Formers 3/16" |
| CS-218 | Sprue Formers 3/8" |
Standard Vulcanizer
Rigid box frame, cast iron construction, stainless steel heated platens and a powerful one inch pressure screw. Platen alignment is by twin guide bars of ample dimensions. The base encloses the controls, thermostat, pilot lamps and on/off switch. Temperature range 500F/260C.
| code | Specification |
|---|---|
| CR-901 | 110V/60Hz |
| CR-900 | 220V/50Hz |
| CR-904 | Heating Elements |
Deluxe Vulcanizer
Heavy duty cast iron construction has larger platens of stainless steel, twin guide rods, and a central pressure screw with a thrust pad. Platens can accommodate multiple molds of similar thickness. Base has built-in controls, thermostat, pilot lamp, and on/off switch. Temperature range 500F/260C.
| code | Specification |
|---|---|
| CR-902 | 110V/60Hz |
| CR-903 | 220V/50Hz |
| CR-905 | Heating Elements |
Mold Frame Plates
Aluminum plates in different sizes to cover top and bottom of the mold frames when vulcanizing. Smooth flat surfaces prevent the rubber from sticking to the platens. Sold in pairs.
| code | l x width |
|---|---|
| CM-440 | 2.5" x 3.5" |
| CM-441 | 3.875" x 5.375" |
| CM-442 | 4" x 6" |
| CM-443 | 5" x 7.125" |
Aluminum Mold Frames
One piece aluminum with a single or double cavity. Additional side holes from escape channels for the excess rubber during vulcanization. Measurements denote the mold sizes.
l x w x ht. |
single |
double |
|---|---|---|
1.875" x 2.5" x 0.5" |
CM-059 |
CM-203 |
1.875" x 2.875" x 0.75" |
CM-034 |
CM-234 |
1.875" x 2.875" x 0.625" |
CM-058 |
CM-202 |
1.875" x 2.875" x 1" |
CM-100 |
CM-201 |
1.875" x 2.875" x 1.25" |
CM-125 |
CM-301 |
1.875" x 2.875" x 1.5" |
CM-150 |
CM-302 |
2.5" x 3.75" x 1" |
CM-129 |
- |
Perforated Flasks
Heavy gauge perforated flasks, in quality stainless steel, withstand thermal shock and corrosion. Ideal for use on vacuum casting machines. Provides complete air withdrawal which results in a denser casting. Available in all standard sizes.
| height | 4" | 5" | 6" |
|---|---|---|---|
| Dia. 3" | CI-047 | - | - |
| Dia. 3.375" | CI-041 | - | - |
| Dia. 3.5" | CI-084 | CI-046 | CI-083 |
| Dia. 4" | CI-034 | CI-035 | CI-036 |
| Dia. 5" | - | - | - |
Regular Flasks
Durable stainless steel flasks are corrosion resistant and withstand thermal shock during quenching. All surfaces of the flask have a smooth finish and edges are machined for optimum sealing.
height |
2.5" |
3" |
4" |
|---|---|---|---|
Dia. 2" |
CI-120 |
- |
- |
Dia. 2.5" |
CI-130 |
CI-131 |
CI-132 |
Dia. 3" |
CI-140 |
CI-141 |
CI-142 |
Dia. 3.5" |
CI-150 |
CI-151 |
CI-152 |
Dia. 4" |
- |
CI-161 |
CI-162 |
High Temp Gaskets
Graphite impregnated gaskets used to seal flasks while vacuuming. Sizes available to suit all standard flask sizes. All are 1/8" thick.
| code | dia. |
|---|---|
| CI-050 | 3" |
| CI-051 | 3.375" |
| CI-052 | 3.5" |
| CI-053 | 4" |
| CI-054 | 4.5" |
| CI-055 | 5" |