Abrasives & Mandrels
Mizzy Heatless Wheels
Silicon carbide resin bonded hard, coarse wheels can be shaped with a file or dresser. Achieves cutting without heat generation. Lubricate with water. Speed max 20,000 rpm. Use with screw mandrels. Packed 50 per box.
| code | dia. x t | hole |
|---|---|---|
| AT-162 | 3/4" x 3/16" | 1/16" |
| AT-163 | 3/4" x 1/8" | 1/16" |
| AT-164 | 7/8" x 3/16" | 1/16" |
| AT-165 | 7/8" x 1/8" | 1/16" |
| AT-161 | 7/8" x 3/32" | 1/16" |
EVE TopStar
Brown: for pre-polishing of gold, composite and semi-precious alloys. Speed 20,000 rpm. Green: for high-gloss polishing of all precious and semi-precious alloys as well as composite. Speed 10,000 rpm. Shank size 3/32".
| color | dia 5x16mm | dia 15x2.5mm | dia 14.5x2mm | dia 5.5x15.5mm | dia 22x3mm |
|---|---|---|---|---|---|
| Brown | AT-064 |
AT-064-01 | AT-064-02 | AT-064-03 | AT-064-04 |
| Green | AT-064-06 |
AT-064-07 | AT-064-08 | AT-064-09 | AT-064-10 |
EVE Goldino
The ultimate polisher for all precious alloys in a 3-step system.
Green: for finishing. Speed 20,000 rpm.
Yellow: for pre-polish. Speed 15,000 rpm.
Pink: for high-gloss polish Speed 10,000 rpm.
Arbor hole is 1/16".
| color | dia 22x3mm | dia 6x22mm | dia 22x3mm | dia 5.5x15.5mm |
|---|---|---|---|---|
| Green | AT-064-12 | AT-064-13 | AT-064-14 | AT-064-15 |
| Yellow | AT-064-16 | AT-064-17 | AT-064-18 | AT-064-19 |
| Pink | AT-064-21 | AT-064-22 | AT-064-23 | AT-064-24 |
EVE Ocean
Blue line universal silicone rubber polishers are for initial polishing of semi-precious alloys, chrome cobalt and titanium. Speed 20,000 rpm. Arbor hole is 1/16".
| color | dia 22x3mm | dia 17x3mm | dia 22x3mm | dia 17x3mm | dia 5.5x16.3mm | dia 5x16mm | dia 15x2.5mm |
|---|---|---|---|---|---|---|---|
| Blue | AT-064-26 | AT-064-26 | AT-064-26 | AT-064-26 | AT-064-26 | AT-064-26 | AT-064-26 |
Unmounted SHOFU Polishers
Premium quality polishers in a flexible bond that is better than silicone rubber. Recommended for enhancing the surface quality of gold, silver and platinum to a very high shine. Available in different shapes to suit all applications. Speed 5,000- max 12,000 rpm. Arbor hole is 1/16". Use with screw mandrels.
| color | grit | wheel dia 22x3mm |
|---|---|---|
| Brown | Fine | AT-138-02 |
 |
|||
| code | shank | hole | type |
|---|---|---|---|
AT-199 |
3/32" | 1/16" | Reinforced |
AT-200 |
3/32" | 1/16" | Flanged |
AT-200-01 |
1/8" | 1/8" | Flanged |
AT-200-02 |
1/8" | 1/4" | Flanged |
AT-200-03 |
3/32" | 1/16" | Straight |
Mandrels-Screw
These mandrels are for holding felt wheels, bristle brushes, cutting discs and items having a maximum thickness of 3/1". thread ends are right handed. For use in hand pieces and grinders.
Mandrels-Split
The slot in the mandrel is to grip abrasive paper strips in order to build up a suitable diameter for inside finishing.
| code | shank | dia. | type |
|---|---|---|---|
AT-184-01 |
3/32" | 9/64" | Straight |
AT-184 |
3/32" | 11/64" | Straight |
AT-185 |
3/32" | 3/16" - 3/32" | Tapered |
Mandrels-Screw Taper
For felt buffs, wheel cylinders and points that are resilient enough to allow the tapered screw to form its threads into the material. Available in right hand threads only.
| code | shank | taper |
|---|---|---|
AT-197 |
3/32" | 1/16" - 3/16" |
AT-197-01 |
1/8" | 1/16" - 3/16" |
AT-197-02 |
3/32" | 1/16" - 3/8" |
AT-198 |
1/8" | 1/16" - 3/8" |
Mandrels-Pin Chuck
Chuck mandrel suitable for holding outer diameter of silicone pins. Pins can be held at various protrusions depending on the type of work. Thread ends are right handed.
| code | shank | hole |
|---|---|---|
| AT-159 | 3/32" | 2mm |
| AT-160 | 3/32" | 3mm |
Mandrel-Snap on
One piece construction with a snap-on end, has a square drive that is positive and avoids slippage.
| code | shank | type |
|---|---|---|
| AT-201 | 3/32" | SQ/Drive |
Mandrels-Cartridge Roll
Hardened steel mandrels for abrasive cartridge rolls. Pilot guides roll for absolute true running.
| code | shank | pilot/d x l |
|---|---|---|
| AT-157 | 3/32" | 1/8" - 3/4" |
| AT-158 | 3/32" | 1/8" - 1" |
